Configure View documentation

POLARIS 5X (WI-FI) Single control unit with colour display, communication protocols and Alexa app - Google Home

Galaxy
Temperature regulation and control systems

“Polaris 5X” represents the new generation of smart control units, thanks to the addition of remarkable features that were not present in previous versions.
Special consideration has been given to the management of fan coil ducted units with 3-speed motor and 0-10V.
The “Polaris 5X” control unit, in addition to the two existing adjustments (on-off and IR protocol), therefore contains in a single product four types of fan control for ducted units available on the market.
“Polaris 5X” is also arranged for use with a consumption meter which, through the RF signal, reads the consumption data in real time and shows them on the control unit’s display and in the “Proair Multi-zone” application, using tables and graphic images.
The “Polaris 5X” control unit, paired with the consumption meter, allows to:
• Highlight energy consumption through the periodic provision of data
• Show current operating conditions and systems’ adjustment temperature
• Allow remote turning on and off and weekly programming of systems
“Polaris 5X” is characterised by the new colour display and features a very intuitive configuration menu that is easy to consult for both the installer and the service centre.

TECHNICAL SPECIFICATIONS:

• Power supply 100 – 240 Vac – 50/60 Hz
• Dimensions W 160 x D 90 x H 34 mm
• Wall mounted or DIN rail mounted
• 2.5” LCD colour display
• Configuration keypad
• Data communication to chronothermostats via RF 868 MHz with a 50 m range in open field, or via 4 x 0.22 cable with a maximum range of 100 m between Polaris 5X and the last thermostat
• Ducted control ON/OFF, 0.10 V or 3 V (with relay module)
• Dehumidifier enable contact
• Air conditioning system energy consumption monitoring
• Window contact management
• 2.4 GHz Wi-Fi connection, local or remote, for control via Tecnosystemi app or voice commands
• Interconnection to ducted units via IR communication with 30 communication protocols with ducted units
• Ready for window contact
• ON/OFF inputs for alarms
• Two lines OUT1 and OUT2 for actuator control
• Control unit firmware update directly via the app