The total size of the door is the most important parameter to take into consideration, therefore height and width. Furthermore, the useful space above it must also be taken into consideration.
The air curtain is a useful tool in order to create temperature separation between the internal and external environment of commercial premises, keeping the door open. Attention: its purpose is not to prevent insects from entering the environment.
A barrier with tangential fans has less air pressure capacity than one with centrifugal fans. For this reason, the higher the door, the more the choice will have to fall on a barrier with centrifugal fans.
The maximum height of the door can be 3.5 m, while 15 cm of air must always be left between the upper intake grille and the ceiling of the room.
In the case of an air curtain with upper suction, it is always necessary to leave 15 cm of air between the upper part of the blade and the ceiling. Furthermore, between the upper part of the door and the lower part of the barrier there can be a maximum distance of 5 cm.
The main purpose of the electrical heating elements is to adequately heat the air coming out of the barrier, making it pleasant and comfortable for customers to enter the room during the winter. For this reason, a barrier with electrical heating elements should not be considered an instrument with the aim of heating the environment where it is installed.
The distinction is made with reference to the side on which the motor is located. If the door opens from left to right, the installation of a barrier with right-hand motor is recommended. Conversely if the door opens from right to left, the advice is to install a left barrier.
No, our barrier models can only be installed horizontally.
AirJet is the only air curtain model that can be controlled via an offline web page (not available on the App Store / Play Store) that can be managed on site and not remotely. Its function is to replace the mobile device with the remote control.
The automatic start kit is an accessory that has the purpose of managing the on/off of the barrier automatically, when the room door is opened or closed. The kit can be used in the following models: AirJet, Aria 3 Silence (with heating element), Aria 3 Silence Front, Aria 2 Elegance T, Aria 2 Elegance TR, Aria 2 Elegance CR and Air For 3 CR.