Selection of the correct item refers to the capacity in l/h, to the kW of the air conditioner and above all to the vertical delivery (head) from the split to the condensate drain.
The Excellens channel is specifically designed for installations on irregular surfaces. In fact it has a rounded base which makes imperfections almost imperceptible.
Instead, the Optima line has a flat base and is therefore recommended for installations on perfectly smooth surfaces.
The heating cable is the ideal solution to solve the problem of freezing condensate water. It features an automatic thermostat which is activated at a temperature of +3°C and switches off at +12°C.
Spirit is the bracket specially designed for installations in environments with a high degree of salinity and saltiness: in fact, it is made of PA6 (glass-filled nylon) and has the characteristic of resisting ageing and atmospheric agents.
The colour of the no-shock vibration dampers refers to the hardness of the material. The two lighter coloured ones (SOFT) are to be applied on the fan side of your outdoor unit, while the two darker ones (HARD) are to be installed on the compressor side.
The vibration damper has the function of isolating the wall bracket from the machine thus avoiding any electrical discharge.
This accessory has been specially designed with a particular rounded shape to allow the refrigerant pipes a wide curvature which prevents them from being crushed and at the same time prevents the insulation from tearing.
The rose inserted in the hole for the passage of the refrigerant pipes prevents them from being crushed and the insulation from being torn.
The rear foot is necessary to adjust the inclination and levelling of the external unit, allowing it to be placed correctly against the wall and avoiding its vibration.