View documentation

ALTAIR POINT Built-in wired programmable chrono-thermostat with touch STEALTH 3X

Galaxy
Temperature regulation and control systems

The chronothermostat “Stealth 3X” for “Altair Point” is applied, using the screws and the template supplied, inside the traditional recessed boxes type E503.
The programmable thermostat allows you to perform quick operations for the management of the zone, adjusting the temperature through the air flow out of the dampers or motorised grilles.
The dialogue data and the power supply to the damper or grille is via an 8-wire telephone cable with an 8-pole RJ45 plug connection.
Attention! It is not possible with the same thermostat to check the grilles and dampers at the same time.

TECHNICAL SPECIFICATIONS:

• Dimensions W 138 x H 95 x D 40 mm
• Protrusion from flush wall 15 mm
• Built-in mounted on E503 type boxes by means of adapter, screws and fixing plugs supplied
• Power supply and data transmission: 8-pin RJ45 type
• Power supply 12 V DC
• Touch keypad – 4.5” LCD display
• Timed or manual features
• Adjustment of the damper or motorised grille in automatic or manual mode
• Timed thermostat lock
• Temperature scale °C / °F
• Humidity % value indication
• AT and set point value
• Clock (AM – PM / 24h)
• Weekday
• The built-in power supply is available on request

Models

Available Models (1)

11181454

LUMIX WHITE, BUILT-IN, CABLED, PROGRAMMABLE THERMOSTAT - "STEALTH 3X - POINT"

Specification items

SPECIFICATIONS
ALTAIR POINT
FLUSH-MOUNTED BACKLIT CHRONOTHERMOSTAT “POINT” WHITE LUMIX – STEALTH 3X
– code. 11181454
The “Stealth 3X” flush-mounted chronothermostat for “Altair Point” with a backlit touch display keyboard allows for quick operations to be performed and verified for zone management, such as: heating; cooling; damper or vent opening position; automatic or manual; daily and weekly time-slot programming; manual function; zone damper or vent opening status; keyboard lock; settings; master indication, defining the main control chronothermostat of the system; clock (AM – PM / 24h); day; temperature scale °C / °F; ambient temperature value; ambient relative humidity %; data confirmation/display lock-unlock; + plus; – minus; SET to access the main menu and choose settings; ON/OFF. The chronothermostat is powered by an external 12V power supply with a plug, connected to the 4-pole connector located on the back of the device. Communication and power supply for the damper or vent, however, occur via the 8-pole RJ45 connector.
Installation is performed using the template and screws supplied inside traditional flush-mounted boxes type E503.

TECHNICAL SPECIFICATIONS
Power Supply: External 12V power supply with plug and 4-pole connector included in the kit
Protection Rating: IP30
Operating Temperature: 0° C ÷ +40°C
Storage Temperature: -10°C ÷ +50°C
Operating Humidity: 20% ÷ 80% RH
Temperature Adjustment Set Point: 10°C ÷ 35°C
Measured Temperature Resolution: 0.1°C
Weight: 180 g
Casing Material: White ABS
Front Material: White PMMA
Optional flush-mounted power supply code.CCE00059 dimensions (w x h x d): 90 x 40 x 29 mm
Flush-to-wall dimensions (w x h x d): 141 x 98 x 14 mm